RAM-6 High Flow Tube Cleaner

  • Simple to operate - minimal training required
  • Stainless steel construction - long life
  • Speed control - set shaft rotation at optimum speed for each application
  • Interchangeable cleaning tools - versatile
  • Large pneumatic tires and heavy-duty contractor dolly - easy to move
  • Simultaneous cleaning solution injection and water power flush up to 500 PSI at 2.2 GPM (35 BAR at 8.3 LPM) - removes deposits
  • Foot switch activation - safe operation

The RAM-6 Tube Cleaner is the ultimate rotary tube cleaning machine. This versatile unit feautres a full 1 1/2 HP (1.1 kW) variable speed drive motor, an optional cleaning solution injection system and a power flush of up to 500 PSI at 2.2 GPM (35 BAR at 8.3 LPM). It is ideal for removing both soft and hard deposits from smooth bore as well as internally enhanced tubes/ pipes 6.4-25.4 mm ID.

  • How it works

    The RAM-6 uses a cleaning toool mounted to the tip of a flexible shaft. The unit feeds high pressure water through the casing to the cleaning tool, power flushing out deposits as they are loosened.

    If the cleaning solution injection system is activated, the unit automatically feeds a mixture of cleaning solution and water through the casing to the cleaning tool as the shaft is fed into the tube. When the shaft direction is reversed, the unit switches to a water only power flush, leaving the tubes thoroughly cleaned.



  • Flexible Shaft Speed:
    200-800 rpm
  • Motor Power:
    1 1/2 HP (1.1 kW)
  • Input Power:
    Standard: 15 amps, 115 V,
    60 Hz AC (Optional: 15 amps,
    115 V, 50 Hz; 7.5 amps, 230 V,
    60 Hz; or 5.5 amps, 230 V,
    50 Hz)
  • Water requirements:
    Min. 25 PSI at 2.2 GPM (1.7 BAR at 8.3 LPM)
  • Output water pressure:
    Up to 500 PSI at 2.2 GPM (35 BAR at 8.3 LPM)
  • Dimensions:
    23" (580 mm) high x 16" (410mm) wide x 10" (250mm) deep.
  • Weight:
    103 lbs (47 kg) net dry