RAM-5SF Speed-Feed Tube Cleaner   | - Speed-feed system power feeds flexible shaft into and out of tubes at 3' (0.9m) per second – reduced labor and increased productivity
- Stainless steel cover and corrosion resistant chassis – long life
- Interchangeability of different size flexible shafts and cleaning tools – maximum versatility
- Quick disconnect of flexible shaft – no tools required
- Large wheels – easy maneuverability up and down stairs
- Simultaneous water flush to remove deposits from tubes – saves time
- Foot switch or gun for operator convenience to activate shaft rotation and waterflow – reduced water consumption and cleaner working area
| | | | -
How it works
The patented RAM-5SF Speed-Feed Tube Cleaner makes tube cleaning quick and easy with its revolutionary speed-feed gun. It is the machine of choice among contractors and managers of large buildings and facilities. It will clean tubes up to four times faster than any other rotary tube cleaner. As a Goodway Blue Nylon Brush is rotated through a tube at the tip of a flexible shaft, the shaft is power fed by the unit into and out of the tube at 3' (0.9m) per second. As the brush travels the length of the tube, water simultaneously flushes out loosened deposits, leaving the tube thoroughly cleaned. Flexible shafts and Goodway Blue Nylon Brushes are available for use with the speed-feed gun for removing soft deposits in straight tubes/pipes 9/16"-1" (14.3-25.4mm) I.D. Other flexible shafts and accessories are available for use without the speed-feed gun for removing a variety of deposits in straight and curved tubes/pipes 1/4"-1" (6.4-25.4mm) I.D. -
Quick By power feeding the flexible shaft through the tubes, Goodway’s revolutionary speed-feed system reduces tube cleaning time by as much as 75% over other cleaning methods. -
Easier operation
With the speed-feed gun, maintenance personnel will no longer have to hand feed the flexible shaft into and out of the tubes. The shaft is power fed by the unit through the control gun, eliminating fatigue caused by manual feeding operations and increasing operator productivity. -
How it works
The RAM-5SF uses a cleaning tool mounted to the tip of a flexible shaft, which is available in different lengths and diameters to fit the size of the tube to be cleaned. As the shaft rotates inside a watertight nylon casing, the unit feeds water through the casing to the cleaning tool. A gun or foot switch controls shaft rotation and waterflow. While the operator or unit feeds the rotating shaft assembly through the tube, the waterflow flushes out deposits as they are loosened. When using the speed-feed feature, shaft feed is totally controlled by the gun. Simply push the top of the trigger to rotate the flexible shaft in a clockwise direction and enter the tube. Push the bottom of the trigger to reverse the rotation and exit the tube. Shaft feed automatically stops at a preset mark when the brush reaches the end of the tube. -
Compact Compact The RAM-4 is a compact, self-contained, roll-anywhere unit which permits operation in tight quarters since longrods are not required. -
How it works The RAM-4 uses a cleaning tool mounted to the tip of a flexible shaft, which is available in different lengths and diameters to fit the size of the tube to be cleaned. As the shaft rotates inside its watertight nylon casing, the unit feeds water through the casing to the cleaning tool. A foot switch controls shaft rotation and waterflow. While the operator feeds the rotating shaft assembly through the tube, the waterflow flushes out deposits as they are loosened. -
Portability Drive unit easily removed from dolly for carrying to confined areas. -
Ground fault circuit interrupter All Ream-A-Matic Tube Cleaners are equipped with a Ground Fault Circuit Interrupter at the plug end of the cord for shock protection. | | | | | |  | Specifications - Flexible Shaft Speed:
862.5 rpm - Motor Power:
3/4 HP (0.6 kW) - Input Power:
Standard: 11 amps, 115 V,
60 Hz AC (Optional: 11 amps,
115 V, 50 Hz; 5.5 amps, 220 V,
60 Hz; or 5.5 amps, 220 V,
50 Hz) - Overall Dimensions and Weight(Excluding Gun and Guide Hose):
37" (940 mm) high x 20"
(510 mm) wide x 17" (430 mm)
deep, 68 lbs (31 kg) net dry - Drive Unit Dimensions and Weight:
19" (480 mm) high x 18"
(460 mm) wide x 11" (280mm)
deep, 58 lbs (26 kg) net dry - Speed-Feed Gun Rate:
3' (0.9m) per second - Speed-Feed Gun Push/Pull Force:
50 lbs (222 N) | |
|
