For wet applications: Flexible Shafts (Nylon Casing) for Tubes 6.4 mm I.D. and
up. Specify actual diameter and tube length. Call for price.
For dry applications: Flexible Shafts (Heat Resistant 150‘ Rigid Covered
Steel Casing) for Tubes 25 mm I.D. and up). Specify actual diameter and tube length.
Call for price.
Cleaning
Tools
Cleaning
tools
GTC-211 Blue nylon brush recommended for removing soft deposits and straight tubes
from 6.4 mm ID and up to 25.Price on request.
SGB Abrasive impregnated nylon brush recommended for removing soft and light
scale in straight tubes from 6.4 mm ID and up to 25.Price on request.
GTC-200
B Brass brush recommended for removing soft and light scale deposits in
straight, ferrous and non-ferrous tubes from 6.4 mm ID and up to 25. Price
on request.
GTC-210 Stainless steel brush recommended for removing soft and light scale deposits
in straight, ferrous tubes from 6.4 mm ID and up to 25. Price on request.
GTC-203
Stainless steel buffing tools are used for removing light to medium scale deposits
or for finishing tubes previously "roughed out" with other cleaning
tools. They can be used in both ferrous and nonferrous tubes. Buffing tools
can only be used in a clockwise direction and cannot be used in internally
enhanced tubes.From 6.4 mm ID and up to 25. Price on request.
PTB
Carbide drills recommendedfor cleaning straight ferrous plugged solidly with
deposit. From 6.4 mm ID and up to 25.4. Price on request.
FHT
Flex-Hone Abrasive Tools are light pressure, soft application honing devices
for cleaning straight tubes. They consist of 180 grit silicon carbide abrasive
globules (stones) bonded to high density nylon filaments. From 6.4 mm ID and
up to 25.4. Price on request.
FHT
Flex-Hone Abrasive Tools are light pressure, soft application honing devices
for cleaning straight tubes. They consist of 180 grit silicon carbide abrasive
globules (stones) bonded to high density nylon filaments. From 25.4 mm ID and
up to 76.0. Price on request.
CDC
Cone Cutter Assemblies are designed for removing scale deposits from straight
and curved tubes. From 60.0 mm ID and up to 102.0. Price on request.
DCA
Drill Cone Assemblies are recommended for cleaning straight tubes plugged solidly
with deposits. Available from 25.4 mm ID and up to 48.0. Price on request.
FBT
Flare Brushes incorporate sentrifugally activated wire cables with cobalt tips
for light descaling and finishing of straight or curved tubes. From 25.4 mm
ID and up to 203.0. Price on request.
GTC-151
Steel Brushes for SAM-3. From 22.0 mm ID and up to
98.0. Price on request.
Flex
Hub Tool
Flex Hub Tools incorporate sentrifugally activated blades for removing hard
and deposits in straight or curved tubes. From 22.0 mm ID and up to 76.0. Price on request.
SFB
Spring Filled Brushes are used for removing heavy scale deposits. From 35.0
mm ID and up to 100.0. Price on request.
Scrubbers
Scrubbers
Tube Scrubbers
Tube Scrubbers are the ultimate design in tube cleaning devices. Call for
price. Coiled Tube Scrubbers
The Coiled Tube Brushes incorporate a revolutionary piston design. They
feature nylon bristles set in a coil, wrapped around a wear resistant polymer
core. The piston design allows a quick insertion into the tubes and helps maximize
the cleaning effectiveness of the bristles. They are ideal for removing soft deposits.
Call for price. Super Scrubbers
Super Scrubbers are the most advanced tube cleaning projectiles available.
They come equipped with either high tensile carbon steel or wear resistant polymer
blades and resilient nitrile brushings. Call for price.
Super Scrubbers
Each Super Scrubber projectile features a patented force adjustment, preset by
the factory, to match both the type of deposit and the tube material. Call for
price.
GTC-211
SGB
GTC-200
B
GTC-210
GTC-203
PTB
FHT
CDC
DCA
FBT
GTC-151
Flex
Hub Tool
SFB
