|
 Simple
to operate - minimal training required • Stainless steel construction - long
life • Speed control - set shaft rotation at optimum speed for each application
• Interchangeable cleaning tools - versatile • Large pneumatic tires
and heavy-duty contractor dolly - easy to move • Simultaneous cleaning solution
injection and water power flush up to 500 PSI at 2.2 GPM (35 BAR at 8.3 LPM) -
removes deposits • Foot switch activation - safe operation
|
The RAM-6 Tube Cleaner is
the ultimate rotary tube cleaning machine. This versatile unit feautres a
full 1 1/2 HP (1.1 kW) variable speed drive motor, an optional cleaning solution
injection system and a power flush of up to 500 PSI at 2.2 GPM (35 BAR at 8.3
LPM). It is ideal for removing both soft and hard deposits from smooth bore as
well as internally enhanced tubes/ pipes 6.4-25.4 mm ID.
The RAM-6 uses a cleaning
toool mounted to the tip of a flexible shaft. The unit feeds high pressure water
through the casing to the cleaning tool, power flushing out deposits as they are
loosened.
If the cleaning solution injection system is activated, the unit automatically
feeds a mixture of cleaning solution and water through the casing to the cleaning
tool as the shaft is fed into the tube. When the shaft direction is reversed,
the unit switches to a water only power flush, leaving the tubes thoroughly cleaned.
|
|
Price
on request
| Flexible
Shaft Speed: |
Variable.
200-800 rpm |
| Motor
Power: |
1
1/2 HP (1.1 kW) |
| Input
Power: |
Standard:
15 amps, 115 V, 60 Hz AC (Optional: 15 amps, 115 V, 50 Hz; 7.5 amps, 230 V, 60
Hz; or 5.5 amps, 230 V, 50 Hz) |
| Water
requirements: |
Min. 25
PSI at 2.2 GPM (1.7 BAR at 8.3 LPM) |
| Output
water pressure: |
Up to 500
PSI at 2.2 GPM (35 BAR at 8.3 LPM) |
| Dimensions: |
23" (580
mm) high x 16" (410mm) wide x 10" (250mm) deep.
|
| Weight:
|
103 lbs
(47 kg) net dry |
|
|
|
