Shock resistant – excellent for applications where using electric equipment
is hazardous • Stainless steel cover and corrosion resistant chassis – long
life • Air lubricator - extends motor life • Interchangeability of different
size flexible shafts and cleaning tools – versatile • Speed/torque control
– shaft rotation can be set at optimum speed for each application • Quick
disconnect of flexible shaft – no tools required Large wheels – easy maneuverability
• Simultaneous water flush or vacuum to remove deposits from tubes – saves
time• Foot switch for operator convenience to activate shaft rotation and
waterflow – reduced water consumption and cleaner working area |
The AWT-100X Air Powered Tube Cleaner is our most powerful unit. It incorporates
the same operating principles as the AWT-100. Equipped with a 4 HP (3 kW) drive
motor, this machine has the strength needed to clean virtually any tube/pipe 1¦4"
(6.4mm) I.D. and up. Flexible shafts and accessories are available for both wet
or dry applications.
The AWT-100X uses a cleaning
tool mounted to the tip of a flexible shaft, which is available in different lengths
and diameters to fit the size of the tube to be cleaned. For wet applications,
as the shaft rotates inside its watertight nylon casing, the unit feeds water
through the casing to the cleaning tool. A foot switch controls shaft rotation
and waterflow. While the operator feeds the rotating shaft assembly through the
tube, the waterflow flushes out deposits as they are loosened. For dry applications,
the GTC-DPA Dry Pickup Attachment and a simultaneous vacuum are used to remove
loosened deposits.
|
Price
on request
| Flexible
Shaft Speed: |
Variable, 500-3.000 rpm |
| Motor
Power: |
Up to 4 hp (3 kw)
depending upon air pressure and volume |
| Air
Requirements: |
Minimum 60 PSI at 85 CFM
(4.1 BAR at 2.38 m3/min), Maximum 100 PSI at 130 CFM-(7 BAR at 3.64 m3/min) |
| Overall
Dimensions and Weight: |
37" (940mm) high x 20"
(510mm) wide x 17" (430mm) deep, 54 lbs (25 kg) net dry |
|
|
|
